Lumber Slab

Some Guidelines For Constructing Sunrooms On Trailer Homes

Constructing a sunroom for your trailer home is a wonderful way to enhance the exterior of your home. In case you’re thinking of taking on this particular job, you need to draw a sketch, keep the roof covering untouched, finish the exterior, paint your own sunroom, and finally, add the finishing details.

A sunroom can perform wonders to help take sunshine as well as light into your trailer. Connecting a sunroom to trailer homes needs a little bit of ingenuity, but it’s by no means impossible. Here is the best way to add on a sunroom to your own trailer house:

Draw a drawing

Before you decide to lay the very first brick, or lumber in this instance, you will need to have at least a rough drawing on paper. The end sketch needs to be drawn on graph paper, and it’s recommended that you use a single square to signify six inches of actual space. sunroom builders propose that as soon as you have determined the exact size of your own sunroom you need to buy an adequate amount of 2 x 12 lumber boards, which you’ll use for the framework of your own sunroom. It is recommended that you utilize a concrete slab for the floor since it will absorb temperature during hot summer season and lower the possibility which your sunroom will get too hot. Additionally, another important step to remember is to have a pest enterprise to treat the concrete slab and also lumber before you begin using them.

Keep the roof covering untouched

Attaching an additional sunroom to the framework of your own trailer home can drastically affect the roof covering of your current structure, and this could cause drainage problems in the future. In order to avoid this, you will need to be careful to leave the roof covering of your trailer untouched throughout the reconstruction process. You need to place your sunroom adjacent to the side of your own mobile home and use enough amounts of sealant to help keep water from leaking in. When building the roof structure of your sunroom, be sure you slant the room no less than one foot from the upper part to the base of the roof in order to give a drainage system. After this, create the walls of your sunroom using brick on the exterior and drywall on the inside. You need to insulate the bottom level of the wall surfaces with the roll-type fiberglass for right insulation.

Complete the exterior

Once you’ve completed the roof and the walls, you should finish the exterior roofing with metal roofing for lasting construction. All window panes and door frames should be sealed and caulked well. You should shop around for pre-made double-paned windows to improve the insulation of your sunroom and save you a lot of hassle compared to building your own custom-sized windows. Next, you’ll need to install electrical circuits for at least one overhead fan, and a few electrical outlets in the room for electrical fixtures. The drywall of your sunroom should be finished up in compound and sand before you start on the paintwork.

Paint your sunroom

Once you’re satisfied with the structure of your sunroom, it’s time to paint the exterior and also interior. For a long lasting job, use weather-resistant paint and choose a shade that suits the rest of your home. Set up cabinets intended for storage and a TV system if you need to do so. Just install carpeting once you’re certain you have sealed all openings securely to protect against water leakage.

Add finishing details

Finally, include the finishing details, and you’re almost done with your own sunroom. This might involve securing home furniture and maybe planting a few bushes and plants around the external surfaces of your room. You may want to include light fixtures, and add some furnishings to make the room homey and comfortable before you introduce the work to your family members or invite several close friends over for a drink in your brand-new sunroom.

These methods are the fundamentals with regards to attaching a sunroom to a trailer house. With adequate experience, you can experiment with other ways to complete this type of project, but for beginners these steps should help you achieve your goal.

Written by Daina W. Morrison. For more information about sunroom builders, head over to http://www.alcoaconstruction.com/additions/sunrooms/.

Making Slab Lumber With a Chainsaw.wmv