Lathe Cutoffs

Rotating Head Cut Off Lathe, Bardons & Oliver RH-1100

Sorby Thin Kerf Parting Tool $29.95 Designed to give the cleanest cuts with a minimum of waste, this Thin Kerf Parting Tool features a 1-1/4″ blade width that eliminates the flexing and twisting associated with thin blades. The double-bevel HSS cutting face imparts fine parting lines to turnings. For a solid interface with the handle, the blade is seated and riveted a full 4-1/4″ into the handle….

Taig – 1173 T Bar Cut Off Tool, Height Adjustable $30.00 An all steel tool body mounts a t-section cutoff tool upside down. The slot is cut at an angle so that the tool can be adjusted to be exactly on center. It is used, like the back toolpost, behind the work. Very rigid….

Chicago Latrobe 760 Cobalt Cut-Off Blade, 1/2 Size (Pack of 1) $28.79 Cut Off – Tool Bits Height: 1/2 Material: Cobalt – M34…

American standard straight cut-off blades for lathes and screw machines. …

AIRCAT 6505 Cut Off Tool Red composite $82.95 The superior mechanics and internal mechanisms of the AirCat mini cutoff tool includes high-quality bearing surfaces, air chambers and turbines. The patented exhaust muffler/filter technology reduces the level of noise while retaining more power and torque. Typical Application: Cutoff tool, Air Consumption (CFM): 3.2, Strokes Per Minute (SPM): 20,000, Case Included: No, Tool Weight (lbs.): 1.8, T…

You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.